Tulsa Calibrations : Best Scales
So we’re back again talking about precision calibrations Tulsa calibrations Oklahoma City colorations Oklahoma calibrations we’re talking about all kinds of calibrations today. Tulsa calibrations community loves our podcasts. I’m Travis and Nate and we got compact we’ve got what do we got.
Well we’re rockin that also calibrations community we are.
We were talking about our first appointment getting back to that. So finally my ship was already had already gone through the whole cycle so I got thrown right into the deployment cycle. I barely got out of school on time to meet them. So head now and stop in Hawaii for the first time ever get to see the beautiful Hawaii beautiful naval base there in Honolulu Pearl Harbor.
We’ve all seen it.
It’s amazing to stand on those on those piers and to breathe that air and to look across the pier at the memorial and we’re not talking about Tulse calibrations precision calibrations are you. Well I mean I’m I’m part of the calibration but it was in Hawaii.
Oh yeah I was at the memorial the memorials in Hawaii.
Yep that’s right.
And that’s where you’re at.
Polska we’re talking about our first deployment in the middle of it right.
I remember that now we’re talking about talking to the Tulsa calibrations community about our first deployment. The military so they can get to know us OK. We got we got some fanmail and some of the mail that was that was wrote in was that they were laughing at Vanderbilt or I guess we’ve already had our first call or our first caller. Oh why did we have a first caller on podcast precision collaborationist also colourations community.
When you miss a lot whenever you when you when you don’t stick to the agenda and the schedule OK but we do have what we have for managerial keep on top of what we have Fanmi we have Vandewalle and they are requesting to get to know us oh well they say they say you guys seem like really really integrity filled.
Gentlemen we want to hear about your past and specifically your first deployments.
Well let’s not let’s not just colorations Let’s not delay in giving our our lovely listeners and supporters our fans what they want.
Tulsa Calibrations So I think we need to continue to tell us a little bit more about that deployment. And so we in Hawaii and there’s a group of us that decide we’re going to rent a car. And so we do that we rent a car and we’re there for three days. So we’re in three section duty. So we were on duty that day we pulled into that kind of sucked.
And then that was off the next two days. I hate when you got when you first pull and it’s extensive calibrations but it happens it happens it happens so we get out the next day we get relieved it’s been the day excuse me in Honolulu at the beach.
It sure is beautiful here but I would be so upset if I spent thousands of dollars on airplane ticket and brought my girl or my kids here to experience Honolulu.
I remember thinking this when I was 18 years old. So you wouldn’t want to have to spend your own money to get there. No Heck no not Honolulu.
Nome in Honolulu was like an infested cockroach version of San Diego’s Gaslamp. That sounds pretty bad.
But now Waikiki Beach itself so beautiful way overcrowed in Honolulu itself has been turned into nothing but Las Vegas without the casinos. You you’re going down the street. Big big big things on either side left and right. Right. Three or four stories tall. That’s how that’s the main strip in Honolulu all is a shopping now.
Tulsa Calibrations You just bind bunch of crap. So I had a brother that had a really good idea that he was going to get ice cream. I was thinking that sounds like a pretty cool place to go himself. Yeah.
You know they probably already have some people and might want to check that market to see what the demand is like and he might want to do some sampling of the market before he puts a big investment to see if he is there and does have a front. Can he get a piece of that market. Yeah that would be my operations manager or opinion to him.
OK. Well and I think there has been some study that goes on there before you start investing a lot of money into certain things. Ice cream business that are pretty good does have some ice cream. We need to have some ice cream.
So I got to go to a wedding a wedding rehearsal tonight and then we’re going to oh. What’s that place Crytek across from sonic. It’s a Mexican joint on Claremore.
Yeah I just know I didn’t get invited. So Craig must not like me very much so I know I was part of that Tulsa calibrations bind since he’s buying it for everybody.
He probably just. You know invited the select few.
Oh I bet there will be 100 people there.
I don’t know. Well. Oh gosh that would be a lot of money.
The way 100 people there and you know what the First could have been made but it’s not now. So you know Craig’s going to have to live with that. You know today’s Cinco de Mayo was right. He’s going to have to live with that. He could have had an amazing evening and I could have made a lot of fun for him. Now now I’m going to go out with my girl you know my girls on her way here right now.
Oh is she now. She is beautiful beautiful loving care. She’s a young woman.
Part of the country she’s on her way to my haçienda. OK is she going to be there when you’re home or away if our schedules. She’s showing up at your place with her kids or what Hayden will be with her. Her older son only a little girl what’s her name Chloe.
Oh she’s so cute so she is. She’s what she’s at her Dad’s this weekend. OK. OK. You’ll meet her don’t worry. Well but she’s lying down. I bet she’s wishing she wasn’t at her dad’s. Now maybe not. Never know. I hope he got a good relationship with her. Keep her keep her straight to keep her straight. That’s right. A bad daddy causes a girl to do bad thing. That’s right. Yeah. You know they say men deserve to have women have women are.
I’m sorry men that deserve to have girls have girls.
There’s a lot of say. So people take that and some people take that as a good thing.
Some people say that is a bad thing but but that’s a saying I’ve heard a lot in. Throughout throughout history even.
Said a little differently and I’ve enjoyed having my grades but I’ve enjoyed having girls for girls.
Plus three girl dogs.
And two fish that probably are girls. We have the homo fish now. Maybe they’ve survived a long time. Are they pretty big fish.
Actually I’ve been there a long time and have survived there like the main troopers. I feel bad because I don’t Jaquith them enough. I mean I just thought of colorations like you can do a whole lot with fish anyway and you can take them out and walk them.
Get your little glass bowl filled up with fresh water and with them and put them in the wagon. That’s a great idea. Pull me down. Yes. Everybody I want to talk to you. Everybody will want to talk to you. I’m sure you want to see your fish. Tulsa calibrations. You have your fish with a little red wagon.
Don’t let them pet it though because they might have Pine-Sol on their hands because you know hurt them they might have just been washing the floors or something or dishes or something and then kill unguaranteed one drop a pint or kill them dead.
Yeah dude. So Donald we pay your goldfish.
Look fishy but they’re not really you know they are man. They’re not that special. They don’t even know their names or what they are so little. So when you take left and right out for a walk I hope you don’t let nobody.
Tulsa Calibrations Nobody pet them here just let look. Sure they can do that. They can do the pet lips through the through the bowl. Or the like that they’ll enjoy that Taso colorations there should be sufficient fish don’t eat a whole lot of interaction.
So how much do you feed them. Do you feed them a calibrated diet. You know because here in the Tulsa colorations community we have a lot of balances not to be confused with scales. Some non calibration technicians might call them scale calibrations. Yeah. Yeah. Which we do calibrate scales we’re talking about balances Okay balance count because I’m asking do you give your amazing to pet fish of this alone a balanced diet and I mean do you put the food on a balance so that it’s the proper amount so they’re not overeating or are you starving them.
Are you starving them. I hope not man. That must not be because they’re living. Well no no. What do they do they swim around a lot. Or do they happen. Do they mostly stay in one spot to conserve energy because you’re starving them. Oh is that a good indicator. Toxic. Yeah that’s a good indicator. All
Tulsa Calibrations right well I did come home after when I was after I’d come back from South Carolina.
They didn’t seem to want to move around too much because there was no way to feed them while we were going in South Carolina. They were being starved to death sitting still conserving energy. Yeah. That’s what happens. That’s what happened. I was really concerned I thought they were like Just give me a cold shoulder. So we need to get your balance when you get your balance so you can give them a balance they say to calibrate it also calibrate calibrated community meal.
They say to kill. They say to give them a calibrate amount of food to do calibrations in 10 seconds. So they have to do the calibrations all in 10 seconds and then the food is gone. That’s the right amount to feed them.
Is that a verified a DOB did practice in the Tulsa calibrations community. I’m afraid I don’t know because I haven’t looked in. Well why don’t we get US.
Why don’t we make us a guard code new cup addition where you have to shake it so many times in a second. And it gives the proper amount of gold of fish food. OK. Is that it. Well gee whiz that’s not bad. That’s genius. And what we’ll do is we’ll get a little pixies to stay in the bottom of the cups to only allow those specific amount out. So it will always be calibrated in Libya. Libya permanently Pixi calibrated Garko fish. Dispenser. You like that. I like that. And you know Taso calibrations on Travis. Nate we are talking about inventing new amazing Tulsa calibrations Garko fish Cup.
I know you want one so the guard co qualified calibrated from Tulsa calibrations dip Cup and the proper usage of a viscosity Cup when you’re doing the viscosity calibration regard co viscosity Cup calibration and Tulse calibrations and precision calibrations.
And so you have to be creative when you’re discussing Gardella versions community.
I don’t mean a thing of water in it. What I want to talk to are fine fans I don’t know if I am wrong and why don’t we see if we get a caller.
OK so maybe I’ll just have to talk about something but I’m just a little water in here.
OK what was that Taco Bell. Talk about like Kool-Aid. Listen. So we’re going to talk a little bit about Tulsa calibrations and where we’re at on the fun bus. There’s been a lot of progress since we talked about the bus last There’s been floor’s been put in there’s no water leaking there’s been refilling there’s a lot of stuff. I’ll be right back.
Yeah. All right. Toxic colorations. TOSed calibrations precision colorations.
Tulsa Calibrations All right well let’s talk about the bus a little bit so the bus has been an issue. OK so what do you do with the bus that’s got holes in it and the holes are in the top of the holes in the bottom of the bus. And so this thing’s gotten leaks. I was gone and this thing all these storms come rolling in. I just finished putting the floor down in this thing. Get some new some would lap siding type boards are actually not upset with that order. It is laminate. So laminate floor and it looks good. It turned out really well. But then the bus is sitting while I’m gone and it rains really hard. And the bus leaks through these holes and the water gets on the floor. And what do you got. You’ve got a damaged floor. Now this thing’s got water problems and it’s. Problems that I don’t know what to do with it. I don’t want to tear it out of there and I’m probably not going to tear it out of there because you know I already put all that effort into putting it down. I just don’t see a ribbon of back up and doing it again so I’ve got to move forward. I think the problems will be covered up with some cabinets over it. There are a couple of rugs down. Not a problem right. So it is going to move forward. So yeah the bus is doing pretty good. I got a tarp over it now because with all this rain and we’ve been getting a lot of rain. But.
Oh what does that freaking me out man. Throwing water at me. All right Travis is back. That’s good because my story is probably boring and but I did keep I did keep the verbiage going. Celebrations and the content.
So well sort of what was it that we talked about the bus a little bit of water damage the water and what’s going on.
Got a tarp over it now because of rain and the holes in the leaking. We’ve had enough rain to float Noah’s Ark. Yeah I think so too. Sure. I mean you saw Grand Lake when I was up there.
I told you man it was just. Yeah it was high. I was just there on Monday. You were there on Monday. That’s right. I told you it was a big project and floated into the bank but it is gone now. Yeah and that’s that’s called what they call bodach. But you know someone that doesn’t maybe grow up I’m like does it Tonio look like a garage.
Tulsa Calibrations It did not look I did not see any floating or anything. All right.
But but I was passing it at like 50 mile an hour with cones down to one lane and they were gone. So that’s why I acknowledge it very well could have been a fluke and could have been afloat but I got I got just enough when I was like What the hell is that doing that route.
And also so high the water was like right next to the road. You know it said look like if it’s just silly. Did you see some of the big round bell Hill bales of hay that were now almost completely under. No I didn’t.
The calibrations didn’t notice but I didn’t notice it. Like I said what bridge it looked like if the water’s only up maybe even a foot more light would probably come over that road. It was Trip man is so high when I came back when I was finished doing the work there. When I came back there was a pontoon boat on the side of the road and the guys were working right there and everything so I guess that guy found found an opportunity where he could just drive his boat to work right up took the run up next to several bridge right there working. That was pretty classic man but it’s a good thing about living on the lake if you got to work across the lake or something get a boat just freaking jump on the boat take off drive across the lake or they were going to find out if it blew the boat up tomorrow tomorrow I think Karen’s going to die tonight.
And I think she’s wrong in the pool scrubber so I can have a clean pool. She’s got some fancy little contraption that does it for me. Nice. She insisted I take it with me last night but I didn’t. Oh big mistake. I don’t know how to work it and I’m not to go. Listen I’m not a man that’s too good to learn from a girl I tell you that right now.
OK I didn’t know as Fishscale. I figured just plug it in and throw it in there or something. Man I don’t know might be. So they’ve got to program it. Maybe you got to I’m sure it’s simple.
That’s what’s got to be simple and complicated and smart people out there. Hey man. I didn’t really have room for.
That was just my thinking. I did I didn’t have room with. I don’t think I get drilled about it. Tulsa elevations. Right well while some as you know. But anyway I think she’s bringing it and because she can take my box trailer back so I hope you don’t need to use that for a little while. Oh speaking of which guess what.
Tulsa Calibrations What. Just because I want to make you feel bad. OK. Give it a go my box trailer has a flat tire. Well that sucks. I feel bad because that trailer shouldn’t have a flat tire has a screw in it. Really. Where would that screw come from. It’s still sitting where I took it off of your truck it ain’t moved. It’s still sitting where you are. OK. The trailer. Yeah. So where did they get this. Where did they get the screw I wonder.
Some idiot on the road. Where does this come from. Oh no big deal. We’ve got to plug. Yeah I’ve already got it. I actually got about twice to do it already and both times got.
To. I forgot the last time I was ready to do it and my compressor blew up on me. Wow. I had a compressor go out now. I may have had one that quit working at one time and it was like making all this racket and still compressing but not compressing like it’s like it just quit like it sounds.
No no no no no it’s all or. But it won’t build no pressure. No it’s so make a racket. It’s going to crash on the new compressor. But I think he’s like one the little ones like what you’ve bought at the shop right. I mean is that what wanted to for that would run a torque wrench wouldn’t it. Like a ratchet ratchet wrench. Now for a long period of time it really won’t.
Not for a long period time. I think I can run mine.
I’ve got a big tank at home in it and it might be time that green country integrity first real estate investments replaces its air compressor that just went out on it.
It should and probably should be calibrated at the time that you get it.
That’s always better to be calibrated when you get it where we’re in the Tulsa colorations community could I take said new compressor to get calibrated.
Tulsa Calibrations Hey precision calibrations bringing on my end with this and. I guess the compressors I guess want to get a meter on it’s got to gauge. Precision calibration to do pressure calibrations. Pressure calibrations along with the transistor calibrations. What’s the Greek word for pressure whosay so.
All right I can you can you can tell I think that’s correct in the Tulsa colorations community world. I believe that is I believe that is correct. All right. Was a good job. Yeah well if you ask me again i’m that is a fantastical answer. So
let’s see. So have you been to Honolulu. You look like a man. No I haven’t in the way never been over that way. Was trash. If you spend the money to go don’t even fly it. And we have to fly it is the only international airport fly you fly in and you make sure you got tickets booked a flight right back out the next day.
OK. It’s impractical to do it the same night because you’re in Honolulu spend a night walk around. But trust me and take my advice and be thankful that you stayed one night and just made it a long day and got up at 10 minutes when the flight leaves and fly over to whichever island you want to go to.
OK. All right. You just don’t want to be there. You don’t want to be there more than a day. OK. Got you. Yeah it’s a waste.
Tulsa Calibrations You just like guess that part of it unless you’re going to shop like you’re in Beverly Hills with the Pacific Ocean all around you. Oh. Then you really like it. Oh it’ll be amazing.
But you can get your own oysters right there on the side of the road that’s got perils and all is guaranteed guaranteed to have a pearl really guaranteed to X-ray them all. Oh that’s exciting. So yeah. Well that’s cool. So don’t go out. OK. Don’t go and Leshin is some stuff calibrated and then we’ll go. And what kind of things. Speaking of which precision calibration should have a team building exercise somewhere like overseas somewhere or like or at least in Mexico or be our somewhere somewhere somewhere where it could be Colorado.
True. It could be. I mean. I mean there’s all kinds of things. But it should be something that should be a great team building exercise.
I think you’re right. I think they were I think I don’t see why not. I think not this year. Not this year. No not this year. Got to figure out what I think next year I think next year should be a reward. It’s a good idea. That’s a good idea or maybe what. Or maybe the we need a year end goal man for this year. That’s you know you’re saying that before we need it you know we need to figure out why what motivates us. You know what. What is it that motivates us. My motivation is to make the company grow. That’s always been my motivation. Just. For what I’m a morning worker see it I’m a morning critical thinker worker. How are you. I’ve told you this before. OK Tulsa Calibrations.
I want to come in and work hard at whatever critical thinking multitasking needs to be done and then I want to execute.
And then I want to evaluate and then the next day I want to talk about it. And I want to do the same thing over and over again.
Yeah so I mean getting up early and getting the office early is one way to be an early rUK worker.
Oh man it’s also calibrations. Yeah it is.
That’s that is that is true. That is true. So a guy gets there early and you become an early worker. And so yeah I think that we just got a book about it. But I think there’s still a late worker though aren’t they.
And there is there’s more than one shift also calibrations